Butyl Glycidyl Ether CAS 2426-08-6
Best Sodium Xylenesulfonate CAS 1300-72-7
25/06/2025
Carbomer CAS 9007-20-9
23/06/2025
Name: Butyl Glycidyl Ether
CAS: 10597-60-1
Purity: 99%min
MOQ: 1KG
Directory Guidance on Butyl Glycidyl Ether
Chemical Structure
Basic Info:
| CAS No: | 2426-08-6 |
| Name: | Butyl Glycidyl Ether |
| EINECS: | 219-376-4 |
| Formula: | In stock |
| Weight: | Look chem |
| Other Names: | BGE; n-Butyl glycidyl ether; Active diluent 501 |
| Type: | Catalysts; Dyes; APIs; Organic raw materials |
| Shelf Life: | 3 years |
| Brand Name: | Look Chem |
| Place of Origin: | China |
Product Introduction:
n-Butyl glycidyl ether, also known as active diluent 501, is a colorless to light yellow transparent liquid at room temperature and pressure. It has a special pungent smell and certain hygroscopicity. It is difficult to dissolve in water but soluble in organic solvents such as ethanol, acetone and benzene. n-Butyl glycidyl ether is an ether compound with ethylene oxide, which has high chemical reactivity. It is mainly used as a stabilizer and plasticizer for polyvinyl chloride and has good application in the industrial preparation of high molecular polymers.
n-Butyl glycidyl ether has an extremely low viscosity of only 0.002Pa.s. This substance is effective in diluting epoxy resin. Its molecules contain ether bonds and epoxy groups. When the high molecular polymer is cured, it participates in the reaction to form a uniform system. The general dosage is 10-15% of the weight of the resin.
n-Butyl glycidyl ether also has good solubility and can be used as a solvent, especially suitable for dissolving resins, paints and coatings. The ethylene oxide unit in the structure of this substance has extremely high chemical reactivity. It can participate in a variety of organic transformation reactions including nucleophilic addition reactions of Grignard reagents, ring-opening reactions under acidic and alkaline conditions, etc. It is often used as an intermediate in organic synthesis to prepare ether compounds.
Nature and Specifications:
Specification
Product Nature
Specification
| Item | Specification |
| Product Name | Butyl Glycidyl Ether |
| CAS No. | 2426-08-6 |
| Appearance | Colorless liquid |
| Shelf Life | 2 years |
| Packing | 1kg/bag,25kg/bag or as your requirements |
Product Nature
- Density: 0.91 g/mL at 25 °C
- Boiling point: 164-166 °C
- Flash point: 132 °F
- Refractive index: n20/D 1.418
- Vapor Pressure: 5 hPa (20 °C)
- Storage temp: Store below +30°C.
Product Packaging
Previous
Next
Butyl Glycidyl Ether Uses:
n-Butyl glycidyl ether is widely used in the electronics, electrical appliances, electromechanical, and mechanical industries to reduce the viscosity of epoxy resins and improve processability. It is suitable for potting, casting, lamination, impregnation and other application processes. It is used as an insulating material, bonding material, and is also used in solvent-free coatings and adhesives.
n-Butyl glycidyl ether can effectively reduce the viscosity of epoxy resins, thereby improving its fluidity and coating properties, and acts as a diluent during the resin curing process.
The substance also has a toughening effect, which can improve the toughness and impact resistance of epoxy resins.
It can be used as a stabilizer and plasticizer for polyvinyl chloride, and as an active diluent for bisphenol A epoxy resin. The substance has the characteristics of low toxicity and ease of use, and it can effectively improve the properties of some resins after hardening, such as impact strength.
As an epoxy modifier, n-Butyl glycidyl ether is classified as an epoxy active diluent. It is also used to synthesize other molecules.
Epoxy resin diluents are really combined with base materials to decrease the viscosity of the treating system, boost its fluidness, consequently prolonging its service life and helping with massive building and construction; while improving operability, it will not impact the basic homes of the healed product. It is convenient for associated applications such as casting, infusion, bonding, securing and impregnation.
Epoxy resin diluents can be separated right into 2 groups: non-active diluents and energetic diluents Amongst them, non-active diluents will certainly not respond with epoxy materials and healing agents, and are totally physically blended into the resin. It is just a mechanical mix with the material, and it is a fluid that plays a role in diluting and minimizing viscosity. The majority of it is volatilized throughout the curing procedure of the glue. When the usage demands are high, inactive diluents can not be used, and energetic diluents should be picked.
What are the qualities of various types?
Reactive diluents
Inactive diluents
Reactive diluents
Reactive diluents usually refer to low molecular weight compounds with several epoxy teams. They can directly join the healing reaction of epoxy resins and become part of the cross-linked network framework of epoxy resin treating products. They have practically no impact on the performance of the cured items and can in some cases enhance the durability of the healing system.
Reactive diluents can be divided right into two types: monoepoxy reactive diluents and polyepoxy reactive diluents. Some monoepoxy diluents, such as acryl glycidyl ether, butyl glycidyl ether and phenyl glycidyl ether, respond to amine healing agents. In solvent-free epoxy finishings, the quantity of monobacterial reactive diluents will not go beyond 15% of epoxy resin, and the quantity of multifunctional reactive diluents can get to 20% to 25%.
Reactive diluents are normally toxic and should be used with fantastic care. Long-lasting get in touch with frequently causes skin allergies and even abscess in serious cases. The dilution result of monoepoxides is much better, and aliphatic types have much better dilution impacts than fragrant types. The acid and alkali resistance of the healed product using fragrant active diluents does not change a lot, yet the solvent resistance will certainly lower.
Inactive diluents
Non-active diluents are mostly high-boiling fluids, such as dibutyl phthalate, dioctyl phthalate, styrene, diallyl phthalate, toluene and xylene. The dosage is generally 5% to 20%. Concerning 12% of phthalic acid and dibutyl phthalate will minimize the viscosity of basic epoxy material from 10Pa? s to 0.5-0.7 Pa?s (25 ℃).
Related References:
- Huang Biwu, Jiang Ankun, Weng Zixiang, et al. Synthesis of n-butyl glycidyl ether and its application as cationic UV curing diluent [J]. Fine Petrochemicals
- Wikipedia
Butyl Glycidyl Ether Manufacturer & Supplier
As an experienced butyl glycidyl ether manufacturer and supplier, Look Chemical is committed to producing and selling high quality products.
We cooperate and trade with 6000+ factories around the world, and our high-quality products and excellent services make us enjoy a high reputation internationally.
As butyl glycidyl ether supplier, Look Chemical provides supply chain solutions to partners and customers in a wide range of industries. We offer competitive pricing and quality products.
If you have a demand for this product, please contact our company’s sales staff, we will provide you with a solution in the shortest time.
Our Promise:
Achievements
Service
FAQ
Advice on Shipping
Achievements
I’m william, CEO of Look Chemical Co., Ltd. Welcome to visit our company. As China’s top Global Supply Specialist of chemicals, we have always been adhering to the principle of “service first, quality first, mutual benefit”, and we insist on Create value for customers and grow together with customers.
In the past few years , we have provided efficient and satisfactory services to more than 6000 customers and have been widely praised internationally. In the future, we will strive to provide more than 100,000 customers with professional and thoughtful services, and strive to become your first choice for worry-free purchasing chemicals in China , Hope to bring you a good cooperation experience. If you have any questions, please feel free to contact us.
Service
Pre-Sales Service
* Timely reply and 24 hours online, the professional team will provide you with the most favorable prices and high-quality products.
* The sample supports testing and inspection.
* Each batch of products will be tested to ensure that its quality meets user needs.
*Packaging can also be made according to customer requirements.
*Any inquiries will be answered by our relevant personnel within 24 hours.
*We will provide you with commercial invoice, packing list, packing list, COA, health certificate and certificate of origin if you need it. If your market has other special requirements, please let us know.
After-Sales Service
*We will monitor the logistics information in real time and will share the information with you.
* You can consult us at any time if you have any questions about the product, and we will answer you in time.
*If you have any questions about the product, you can report it to us, we will deal with it in time for you, and the product can be returned.
FAQ
DO YOU ACCEPT SAMPLE ORDER?
We will make samples before mass production. After the samples are approved by the department and users, we will start mass production. During the production process, we will carry out 100% inspection, and then carry out random inspection before packaging.
WHAT’S YOUR MOQ?
Our MOQ is 1kg. But usually we can also accept a smaller quantity, such as 100g, if you need it, provided that the sample fee is 100% paid.
IS THERE A DISCOUNT?
Different quantity has different discount.
HOW TO CONFIRM WHETHER THE PRODUCT QUALITY MEETS OUR NEEDS BEFORE PLACING AN ORDER?
You can consult us to get free samples of some products, you only need to pay the freight or arrange express delivery to us and get the samples. You can send us the product specifications and requirements you need, and we will manufacture products according to your requirements.
DO YOU SUPPLY PRODUCT REPORT?
Yes. We’ll give you product analysis report before shipping.
LEARN MORE ABOUT US
Shandong Look Chemical
Advice on Shipping
1. For products ≤50kg, we recommend using express delivery, which is usually called DDU service (discounted, convenient).
2. For products ≤500kg, we generally recommend air freight, which is usually called FOB, CFR or CIF service (fast and efficient).
3. For products >500kg, we generally recommend shipping by sea, which is usually called FOB, CFR or CIF service (economical, safe).
4. For high-value products, please choose air or express to ensure the safety of product transportation.
Product Data:
1. Certificate Of Analysis (COA)
2. Material Safety Data Sheet (MSDS)
3. Route of synthesis (ROS)
4. Method of Aanlysis (MOA)
5. Nuclear Magnetic Resonance (NMR)
6. Packing pictures and loading video before loading
7. Free Sample
8. Factory audit
